dispenseALL dispensing valves
The dispensing system dispenseALL420 covers a wide spectrum of tasks. Every machine can be indvidual adapted to any application. The following valves can be integrated by standard. The universal base allows also the use of customized dispensing valves. Please feel free to ask us.
Time-pressure dispenser valve |
|
|
The simple means of attaching the valve makes it particularly robust and low-maintenance. The adjustable pressure affects the cartridge after a short period. The desired amount can easily be set in the software. Typical applications:
|
Drive: Pneumatic Principle of dispensing: Time-pressure Dispensing Speed: 3600 Dots/h Viscosity: pasty |
Precision dispenser valve |
|
|
In the case of the precision dispenser valve, additional parameters such as temperature and the fill level of the cartridge are collected. The processor control regulates these values, the pressure and the time of the dispensing impulse in order to achieve the highest repeat accuracy. This enables the safe dispensing of amounts from 0.0005 to 5 mm³. The processor control enables the dispenser valve to be mounted very easily. This makes the valve remain robust and low-maintenance in spite of the highest accuracy. Typical applications:
|
Drive: Pneumatic Principle of dispensing: Time-pressure inclusive processor-controlling Dispensing Speed: 3600 Dots/h Viscosity: humid - pasty Syringe cooling Level compensation Suck back
|
Volumetric dispensing system |
|
|
Suitable for the accurate dispensing of watery to pasty media such as SMD adhesive, soldering paste or silver conductive adhesive. The medium is transported with as little application of pressure as possible. The actual dispensing is carried out by being transported by the spindles. This means the application of pressure of the material is kept as low as possible. Typical applications:
|
Drive: Servo-motor Principle of dispensing: screw conveyor Viscosity: watery - pasty |
Jet dispensing system |
|
|
The very fast piezo dispenser valve dispenses amounts at a very high speed. In the case of a dispensing frequency of up to 150 dots/second, it is possible to constantly apply very small amounts (up to 2 nl). Typical applications:
|
Principle of dispensing: volumetric Viscosity: pasty - 50 - 2.000.000 mPAs |
Spray dispensing |
|
|
The spray valve can handle low to medium viscosity materials. It is most suitable for oils, separating agents and alcohol. The valve is made for the attachment to a controller and a material feeding container like a syringe or pressure tank. The slim construction allows to easily retrofitting to existing systems. Typical applcations:
|
Principle of dispensing: Spraying Viscosity: 50.000mPA pasty |
